Product ID:WIRE ROPE COMPOUND 9RZ-122, 83018
MSDS Date:08/11/1994
FSC:9150
NIIN:00N084531
MSDS Number: CGTJN

METAL LUBRICANTS CO

17050 LATHROP AVE
HARVEY, IL 60426
US

Emergency Phone: 800-255-3924

Info Phone: 708-333-8900

Preparer: LAWRENCE COHEN

Cage: 10873

FUCHS LUBRICANTS CO

8327 HARVEY, IL 60426 US

Telephone: 708-333-8900

Cage: 10873

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)

CAS: 64742-52-5

RTECS: PY8035001

Fraction By Weight: 30-60%

OSHA PEL N/K

ACGIH TLV: N/K

PETROLEUM HYDROTREATED HEAVY NAPHTHENIC)

RTECS: 9999999ZZ

RESIDUES (PETROLEUM), VACUUM; (ASPHALT(PETROLEUM RESIDUES,

CAS: 64741-56-6

RTECS: VG7069000

Fraction By Weight: 3-7%

OSHA PEL N/K

ACGIH TLV: N/K

WAX

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HEATED MATERIAL SPLASHED INTO
EYES CAN CAUSE SERIOUS INJURY. INGESTION: LOW ORDER OF TOXICITY.
CHRONIC: INHALATION OF MIST/FUMES FROM HEATED MATERIAL IN HIGH
CONCENTRATIONS MAY RSLT IN DIZZINES S, HEADACHE, RESPIRATORY
IRRIT/UNCON. EYE CONT MAY PRDCE MILD TRANSIENT IRRITATION. FUMES
FROM HEATED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: MATL IN HIGH CONCS MAY CAUSE EYE
IRRIT. PRLNGD/RPTD SKIN CONT MAY CAUSE IRRIT, DERM, OR MORE SERIOUS
SKIN DISORDERS. PERSONNEL W/PRE-EXISTING SKIN DISORDERS SHOULD
AVOID CONT W/THIS PROD. IF HEATED MATL CONTS SKIN, SEVERE BURNS
MAY RSLT.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS.

First Aid:EYES: FLUSH W/LG AMTS OF WATER FOR @ LST 15 MINS. IF IRRIT
PERSISTS, CALL PHYS. SKIN CONT: WASH PROMPTLY & THORO W/SOAP & WARM
WATER. IF HOT MATL CONTACTS SKIN, IMMED COOL BEFORE ATTEMPTING
REMOVAL. C OOL W/WATER OR ICE. APPLY TOPICAL DRESSING. SEV
BLISTERED BURNS SHOULD BE TREATED BY PHYS. INHAL: IF OVEREXPOSED TO
MIST, VAPS/FUMES, REMOVE PERSON FROM CONTAMD AREA TO FRESH AIR. IF
BRTHG IS (SUPDAT)

Flash Point Method:COC
Flash Point:>399F,>204C
Extinguishing Media:DRY CHEMICAL OR WATER SPRAY OR WATER FOG OR CO*2 OR
FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . CLOSED CONTAINERS EXPOSED TO FIRE MAY BE COOLED WITH
WATER.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:CONTAIN SPILLS, THEN CLEAN UP USING VACUUM
TRUCK OR ABSORBENT MATERIAL SUCH AS EARTH, CLAY OR VERMICULITE.
REPORT SIGNIFICANT SPILLS TO APPROPRIATE AGENCIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS SEALED UNTIL READY FOR
USE. AVOID EXCESSIVE STORAGE TEMPERATURES. DO NOT STORE NEAR STRONG
OXIDIZING AGENTS.
Other Precautions:DISCARD/WASH CONTAMD CLTHG BEFORE REUSE. IS USED IN
APPLICS WHERE MIST MAY BE GENERATED, OBSERVE TWA/PEL OF 5 MG/M3 FOR
MINERAL OIL MIST (OSHA & ACGIH). ASPHALT(PETROLEUM) FUMES: 5 MG/M3
(ACGIH). PARA FFIN WAS FUME: 2MG/M3 (OSHA/ACGIH).

Respiratory Protection:NOT NORMALLY NEEDED AT AMBINET TEMPERATURES. USE
NIOSH CERTIFIED RESPIRATOR IN CONFINED SPACES OR IF FUMES, MIST OR
VAPORS DEVELOP FROM HEATING OR AGITATION AND EXPOSURE LIMIT IS
EXCEEDED.
Ventilation:LOCAL IF NECESSARY TO MAINTAIN ALLOWABLE TWA (TIME WEIGHTED
AVERAGE) OR TLV (THRESHOLD LIMIT VALUE).
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
RUBBER APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: IRREGULAR/HAS STOPPED, RESUSCITATE & ADMIN OXYG-SEEK
MED ATTN IMMED. INGEST: CONTACT PHYS IMMEDIATELY.

Boiling Pt:B.P. Text:>601F,>316C
Vapor Pres:NEGLIGIBLE
Vapor Density:>1
Spec Gravity:<1 (WATER =1)
Evaporation Rate & Reference:<.01 (N-BUTYL ACETATE =1)
Solubility in Water:0 (BY WEIGHT %)
Appearance and Odor:BLACK SEMI-HARD SOLID. MILD PETROLEUM ODOR.
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, ALKALIES & OXIDIZERS SUCH AS LIQUID CHLORINE.
Stability Condition to Avoid:PRODUCT IS STABLE UNDER NORMAL CONDITIONS.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE FROM
BURNING.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.